3 Pack Epoxy Adhesive System
Introducing 3 Pack Epoxy Adhesive system for fixing Road Safety products
We have formulated three components pack; resin, hardener & filler (silica), for fixing Raised Pavement Markers (RPM/Road Studs/Cat eye), Spring Post, Median Marker, Plastic and Rubber Speed Bumps/Breakers, Rumble Strips Etc. on asphalt & concrete surfaces.
Single pack weights 4.5Kgs and consists of 3 components
- Epoxy Resin (1 Kg)
- Hardener (500 Grams)
- Quartz Sand (for adding strength) (3 Kgs)
Just mix the epoxy and hardener in desired quantity in 2:1 ratio and add fillers and mix it until a paste is formed. Then, simply place the adhesive on the road and fix the product. Our Epoxy adhesive system cures very fast, so more road blockage and it is also free from any kind of solvents, so you can fix the road studs at the center of road without using nail. Only Epoxy Adhesive kit in the market which can provide better results as compared to 3M.
- Cures at room temperature
- Excellent adhesive strength
- Good mechanical & chemical properties
Certification of Analysis (3 Pack Epoxy Adhesive System)
| Product Specifications | Value |
|---|---|
| Appearance | Clear Liquid |
| Epoxy Equivalent Weight | 184-191 g/eq |
| Viscosity @25C | 11000-15000 mPas |
| Epoxy Value | 5.25-5.45 Eq/Kg |
| Hydrolsyable Chlorine | Max 0.05% |
| Volatile Content | Max 0.5% |
| Product Specifications | Value |
|---|---|
| Appearance | Max 17, Orange-Red |
| Amine Value | 490-550 |
| Viscosity@25C | 2000-3000 mPas |
| Volatile Loss | <=4.0 |
| Density | 0.98-1.01 Kg/L |
| Recommended use Level | 2:1 Epoxy:Hardener |
| Product Identifier | Silica Sand, Filter Sand |
|---|---|
| Other means of Identification | Quartz, Crystalline Silica, Silica Dioxide, Ground Silica |
| Product Specifications | Value |
|---|---|
| Appearance | Light Skin Colour |
| Viscosity @ 25°C | 7,000 – 8,000 m Pas |
| Resistance | Excellent Resistance to Water and Chemicals |
| Gel Time @25°C | 20-30 Mins |
| Fully Cured | 4 Hours |
| Mixing Ratio (Epoxy: Hardener: Sand) | 1000:500:3000 |
| Tensile Strength Kgs/cm2 | 300-350- 95MPA |
| Compressive Strength | 1000 kilograms per CM2 |
